Made of high-density Crystal Fiber Stones. Excellent cutting performance, stable processing ability, and low abrasion. Suitable for deburring and grinding on automation equipment.
Size : Ø6 x 30L x Ø8
#150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-00630 | CB31P-00630 | CB31V-00630 | CB31O-00630 | CB31B-00630 | CB31W-00630 | CB31R-00630 |
| Holder | XH-CB006 | |||||
Size : Ø15 x 50L x Ø6
| #150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-01550 | CB31P-01550 | CB31V-01550 | CB31O-01550 | CB31B-01550 | CB31W-01550 | CB31R-01550 |
| Holder | XH-CB015 | |||||
Size : Ø25 x 75L x Ø9
| #150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-02575 | CB31P-02575 | CB31V-02575 | CB31O-02575 | CB31B-02575 | CB31W-02575 | CB31R-02575 |
| Holder | XH-CB025 | |||||
Size : Ø40 x 75L x Ø12
| #150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-04075 | CB31P-04075 | CB31V-04075 | CB31O-04075 | CB31B-04075 | CB31W-04075 | CB31R-04075 |
| Holder | XH-CB040 | |||||
Size : Ø60 x 75L x Ø13
| #150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-06075 | CB31P-06075 | CB31V-06075 | CB31O-06075 | CB31B-06075 | CB31W-06075 | CB31R-06075 |
| Holder | XH-CB060 | |||||
Size : Ø100 x 75L x Ø17
| #150 |
#200 |
#400 |
#600 |
#800 |
#1000 |
#1200 |
| CB31G-10075 | CB31P-10075 | CB31V-10075 | CB31O-10075 | CB31B-10075 | CB31W-10075 | CB31R-10075 |
| Holder | XH-CB100 | |||||
Holder
D x L x L1 x d (mm)
| Model | Size | Cristone Bristle Size |
|---|---|---|
| XH-CB006 | Ø10 x 70 x 30 x Ø6 | Ø6 |
| XH-CB015 | Ø18.5 x 90 x 30 x Ø6 | Ø15 |
| XH-CB025 | Ø30 x 140 x 30 x Ø10 | Ø25 |
| XH-CB040 | Ø45 x 140 x 30 x Ø12 | Ø40 |
| XH-CB060 | Ø65 x 150 x 35 x Ø12 | Ø60 |
| XH-CB100 | Ø110 x 162 x 40 x Ø16 | Ø100 |
| Way to set up |
| 1. To set fiber brush into the holder. |
| 2. Adjust the length of the fiber brush. |
| 3. Fix bolts into the slits. |
| Attention |
| 1. Please use the tip of the fiber brush for grinding, because the side of the fiber brush does not have grinding force. |
| 2. To remove burrs on the edge, the Cristone Bristle needs to go the opposite direction of burrs. It gets more efficient removing / polishing result. |
| About burrs |
| 1. After processing precision machining, the burrs will occur on the side of the slit. |
| 2. Process the fiber brushes to the direction ① or ② which face the burrs directry. |
| 3. After proceeding in one direction, the burrs will occur inside the slit. |
| Processing examples |
| The parts of automobile Workpiece : ADC12 S 6000 min F 1000 mm / min-1 D 0.5 mm |
| The parts of air craft Workpiece : Aluminum alloy S 6000 min F 1000 mm / min-1 D 0.5 mm |
